Growing Hydroponic Weed – Basic systems
Home Growers – hydroponic systems for the beginner grower that are worth reading about. Hydroponic systems for a beginner breeder may sound like a complicated matter, but in practice, there are some systems that offer not only great results but also an easy life.
Hydroponics and cannabis – Hydroponic systems, growing cannabis at home is a hobby that one of the great advantages that characterizes it is simplicity and ease and minimum investment and effort. For this reason, a large proportion of home growers engaged in the field avoid dealing with “complicated” issues such as CO2 (carbon dioxide) systems or hydroponic growing systems that require little learning before starting work.
Indeed, hydroponic cannabis cultivation systems suffer a bit from a “prestigious” status that creates in new and potential growers the impression that it is not worth dealing in the field, because it is seemingly not user-friendly, especially for the novice grower. However, the actual situation is completely different, and the truth is that there is such a thing as hydroponic systems for the novice breeder, and it is even very simple hydroponics and cannabis growing has never been simpler.
Here are 3 hydroponic systems for the beginner breeder that you can purchase at any branch of home growing equipment and even order online.
The hydroponic systems differ greatly from each other in the manner of use and the principle of operation, so it is worth thinking about what suits your needs or the setup you have planned. In any case, the growing medium used in these systems is a traditional hydroponic substrate such as Hydroton.
Here is some basic information about 3 hydroponic systems that are suitable for the beginner tower and the way they work:
Growing Hydroponic Weed in a WaterFarm system
The WaterFarm system is an automatic and closed irrigation system. It consists of one large pot containing up to 2 plants. When growing cannabis it is better to settle for one larger plant. This system allows growing in an almost completely automatic configuration with only basic control needed. It is optimal for beginner growers.
The plant(s) growing in the WaterFarm system sits inside a supporting “ring” that simulates a smaller pot placed inside the large pot. This gives the plant a supportive framework for accelerated growth, along with optimal fertilization at 360 around its entire base. The large pot is completely filled with a hydroponic substrate such as Hydroton clay pebbles, which allows the plant a huge space for growing and cultivating a branched and robust root system.
The hydroponic part of this system is extremely simple to operate. All that is required of the grower is to add fertilized water (and renew every 10 days). After adding nutrients to the water they enter the internal circulation of the system, and it uses them to fertilize the plant optimally over time. This is a great system for beginners because you do not have to adjust or set the fertilizer doses or operating times of the system. Just add water into it, connect it to electricity, and let the hydroponic magic do its thing.
Those who choose to grow in the WaterFarm system should know that the growing kit that comes with the system does not always include an air pump, so this is necessary for growth in the system, so be sure to purchase it separately. If you have chosen to buy from a reseller that does not include the air pump in the price of the system, add the pump to your calculation, which is a must for optimal use of the system.
Growing Hydroponic Weed in a Bucket-based DWC system
The DWC (short for deep water culture or “deep water culture” system) is a system relatively similar to the overall structure of the WaterFarm but is smaller and consists of “units” each of which is a bucket/pot in itself that allows the growth of A solitary plant. In principle, even a single bucket that is not “chained” and connected to a larger system is the DWC system itself, because it upholds the principle of operation of the system.
The bucket of the DWC system operates on a principle similar to that of the WaterFarm system: the entire bucket is filled with a growth substrate such as Hydroton, which allows the roots maximum growth space within the system boundaries. At the bottom of the bucket are oxygen and an air pump, which enrich the water to allow life in the contents, and all the water that exists in the system from the moment of the first addition flows in it in constant and timed circulation to produce the highest quality fertilizer.
In the DWC system, the plant sits in a mesh cup or similar vessel, which replaces the “ring” of the WaterFarm system and gives the plant a stable and permanent base to stand on. The main difference is that here the plant has a permanent element and not just a factor that limits its peripheral growth, which strengthens the resistance of the roots especially in the early stages of growth.
The DWC system is also an optimal system for the beginner breeder that works with the “water, connect and drive” method, and there are many versions of it that contain additional control components that allow for fully automatic growth. The most basic version of the DWC system, which includes one flower pot and the essential pumps, requires you to have relatively close control, but not beyond that.
The simplest version – a flood tray with cloth pots
The two systems we have introduced so far, the WaterFarm and the DWC, both are considered to be particularly simple growth systems. But the simplest option really is a combination of fabric pots (allowing water to seep in and watering 360 degrees from all directions of the bottom of the pot) and the so-called “flood tray” – whose name describes it simply and accurately Hydroponics and cannabis have never been simpler.
A “system” of fabric pots and a flood tray, as far as can be called a system and not an excellent improvisation suitable for any beginner grower, works according to a very simple principle: there is no need to water the pots individually, when watering into the tray itself, reaching about half of each The plants in parallel. In this method, all plants can absorb a large number of nutrients due to exposing a large area of their roots to water and nutrients, without the need for a complex or simple system.
The word “flooding” perfectly describes the only notable disadvantage of this method, in which flooding of the tray occurs which automatically has the potential for disaster and problems. All in all, it is a need to work more gently and avoid spilling water in the tray, which in this growth configuration, unlike in the other two systems, is actually possible, but it is still important to take this into account when choosing a new hydroponic system.
It is important to note that flood trays and mesh pots can be purchased in many sizes, so this option offers the novice breeder even the highest level of versatility, and the ability to adapt the new hydroponic set-up to his exact needs. Another advantage of this option is its relatively low price, which makes it possible to assemble even a particularly large set-up at a significantly lower price